This article has moved... Check the Website instead:
http://www.hughshandbuilt.com/2012/05/30/pamcopete-277-ignition-install/
Hugh
Hugh's HandBuilt is a small custom shop in the Mountains on North Carolina.
Wednesday, May 30, 2012
Thursday, May 17, 2012
Voodoo Vintage Roller - For Sale!
We have a genuine Voodoo Vintage Roller for sale, with a Clean SC Title ready to go!
From Voodoo Vintage's Sigh:
"The MK5 (Lone Wolf) frame features clean lines and soft radius bends along the upper struts and backbone providing one of the lowest profile frames offered in our current line up" Frame Retail is $845 - Not Including a Clean/Clear Title (which this one has!)
This Roller includes NEW Excel 21" Rims, Laced to Drum hubs using NEW Stainless Buchanan's Spokes. NEW Avon SpeedMaster Tires are installed on the rims. The forks are XS650, shaved and lowered. Includes handlebars, headlight, levers, throttle and what you see here...
Retail Prices for new parts:
- Frame without Title: $845.00
- 2 NEW Avon Tires and Tubes $250.00
- NEW Excel Rims $250.00
- Buchanans Stainless Spokes $320.00
TOTAL: $1665.00
Not including the extras like a set of nice shaved and lowered forks, good hubs, labor to lace the wheels and mount the tires, handlebars, headlight, etc.. and you still wouldn't have a clean and clear title. This one has an OEM XS650 Headtube welded onto the frame by Voodoo Vintage, and is ready to go. Titled headtubes alone are running $250 lately...
Willing to let ALL of this go for $1500. Take a look below for more pics...
Specs and details on this frame:
SOLD SOLD SOLD SOLD SOLD SOLD SOLD
From Voodoo Vintage's Sigh:
"The MK5 (Lone Wolf) frame features clean lines and soft radius bends along the upper struts and backbone providing one of the lowest profile frames offered in our current line up" Frame Retail is $845 - Not Including a Clean/Clear Title (which this one has!)
This Roller includes NEW Excel 21" Rims, Laced to Drum hubs using NEW Stainless Buchanan's Spokes. NEW Avon SpeedMaster Tires are installed on the rims. The forks are XS650, shaved and lowered. Includes handlebars, headlight, levers, throttle and what you see here...
Retail Prices for new parts:
- Frame without Title: $845.00
- 2 NEW Avon Tires and Tubes $250.00
- NEW Excel Rims $250.00
- Buchanans Stainless Spokes $320.00
TOTAL: $1665.00
Not including the extras like a set of nice shaved and lowered forks, good hubs, labor to lace the wheels and mount the tires, handlebars, headlight, etc.. and you still wouldn't have a clean and clear title. This one has an OEM XS650 Headtube welded onto the frame by Voodoo Vintage, and is ready to go. Titled headtubes alone are running $250 lately...
Willing to let ALL of this go for $1500. Take a look below for more pics...
Specs and details on this frame:
SOLD SOLD SOLD SOLD SOLD SOLD SOLD
Monday, May 14, 2012
Metric Bungs! Keep that metric build 100% Metric!!
Well the time has finally come, that I got a few spare moments to create Metric Bungs for you Jap Bike Builders out there!
That's Right - we realized that keeping a random SAE tool in your roadside repair kit doesn't make any sense, so we are now releasing our DIY Metric Bungs for mounting fenders, tanks, brackets, etc.. on your custom motoscoot.
These are the exact same as our other DIY Bungs - only these are available in M8x1.25 thread pitch. These are machined from 1018 Steel, and are 100% USA MADE right here in North Carolina!
Why settle for mix-matched hardware when you can keep it all Metric?
That's Right - we realized that keeping a random SAE tool in your roadside repair kit doesn't make any sense, so we are now releasing our DIY Metric Bungs for mounting fenders, tanks, brackets, etc.. on your custom motoscoot.
These are the exact same as our other DIY Bungs - only these are available in M8x1.25 thread pitch. These are machined from 1018 Steel, and are 100% USA MADE right here in North Carolina!
Why settle for mix-matched hardware when you can keep it all Metric?
Wednesday, May 2, 2012
Happenings within Hugh's HandBuilt
Well folks, we've been SLAMMED this spring - and we aren't complaining. We've been working out hind ends off to make sure your parts and services happen in a timely fashion. A few things are behind schedule, mostly complete engine builds and other labor intensive jobs such as fork shaving and rebuilding. I apologize for not keeping more updates on the Blog, but more on that later...
Things are going very well in the shop, we've been rephasing cranks and cams daily, machining tons of lowering spacers and bungs, keeping up with PMA Orders and Tech, as well as making sure we keep plenty of Solid Riser Bushings in stock while staying plenty busy with our newest creation - the Hydraulic Clutch Conversion.
But, the best thing happening at Hugh's HandBuilt, is the addition of a new family member in the next few months...
That's right! My lovely wife and I are expecting out first child late August, and we can't be more excited... We like surprises, so we won't know the sex of this lil' one until the birthday... Kinda cool huh!
We have newer product plans in the works, and lots of things happening in the shop that we are excited about as we get the time to make them happen.
Thanks so much for your continued support and encouragement as we bring the best in Tech and Products to the DIY Motorcycle Building Scene... This company is built solely on the quality of our products and our great customers, and we could never thank you enough.
Hugh
Hugh's HandBuilt
PS - Stay tuned in the next few weeks as we bring you a Pamco 277 Install How-To, Updated Bungs, and a few other cool builder goodies and articles to make life withe the XS650 that much more fun...
Things are going very well in the shop, we've been rephasing cranks and cams daily, machining tons of lowering spacers and bungs, keeping up with PMA Orders and Tech, as well as making sure we keep plenty of Solid Riser Bushings in stock while staying plenty busy with our newest creation - the Hydraulic Clutch Conversion.
But, the best thing happening at Hugh's HandBuilt, is the addition of a new family member in the next few months...
That's right! My lovely wife and I are expecting out first child late August, and we can't be more excited... We like surprises, so we won't know the sex of this lil' one until the birthday... Kinda cool huh!
We have newer product plans in the works, and lots of things happening in the shop that we are excited about as we get the time to make them happen.
On another note, we will be out of the shop all of Next Week - We will continue to answer emails, but all products purchased will be delayed until the following Monday.
Thanks so much for your continued support and encouragement as we bring the best in Tech and Products to the DIY Motorcycle Building Scene... This company is built solely on the quality of our products and our great customers, and we could never thank you enough.
Hugh
Hugh's HandBuilt
PS - Stay tuned in the next few weeks as we bring you a Pamco 277 Install How-To, Updated Bungs, and a few other cool builder goodies and articles to make life withe the XS650 that much more fun...
Subscribe to:
Posts (Atom)