Checkout the online shop for new parts and service for you ride!

Click Here www.hughshandbuilt.com for more info on parts! Thanks - Hughs.

Saturday, January 15, 2011

Fabricator Parts - Do it yourself Bungs

Ok, so this post is gonna be a little misleading.   I'm not gonna teach you how to make a weld-in bung from a chunk of soap, or how to carve one out of an old fencepost.

Most of us have bought bungs at some point or another.  They are cheap, easy to use, and just make sense. But, I have found that most of the cheaper bungs on the market look like the ones pictured below.


There ins't much wrong with this style, they do the job.   But, how many of us have played the "Put a bolt in the Bung, try to hold it in place, tack weld it, twist and tug on the bolt to line up the bung to exactly where we want it, break the tack weld while doing so, and then repeat the whole process" game?    

No need to answer that one, I think that anyone who has used a bung like this, especially in a piece of tubing, has run into that problem.   I can't think of how many times I have drilled too large of a hole and dropped a bung into the tubing or had to play the above game to get it lined up exactly where I want it.  The other problem with most prefab bungs, is that they are larger than 1/2" OD, but how many of us own bigger drill bits?  While working on a fuel tank mount this week, I decided to build a whole new style of bung.

Since I was mounting a fuel tank, I was planning on a standard 5/16-18 thread.  I cranked up the lathe, and made a few bungs just like pictured above.  Then I decided to turn down the main section of the bung so that it could easily drop into a 1/2" OD holes (something I could drill with my standard drill set, and a hand held drill)



Drilled a 1/2" Hole in my frame for the tank mounts, and dropped the new style bung into it.


Look Ma!!! No Hands!!!   Its nice to have a bung that will stay in place while I weld it in.  No more sticking a bolt in the bung, twisting it around, burning your fingers, and smelling your own flesh burning.  I can dig it


All welded in (I've been enjoying some Silicon Bronze Filler for stuff like this)




I went ahead and got the front mount welded in while I was at it...



Most people would probably like the bungs to sit lower on the frame, but for a tank mount, I like to keep some room under the tank.  These give a nice 1/8" or so under the tank for wiring, zip ties, foam, etc...  If that doesn't work for you, then once you have the "Do It Yourself" bungs installed, you can grind them down lower to the tube.  If you want a set, they are $12.50 a pair ( and will be added to my "Fabricator Parts" list (once that actually gets put together... )


To Purchase go to our Store:  http://hughshandbuilt.com/shop/

2 comments:

  1. You did a neat job. You’re good at doing DIY projects and repairs! I like your motorbike designs too! They all look cool!

    Salvatore Aguilar

    ReplyDelete
  2. Your work is very engaging! Amazing piece and is worth reading and sharing. Hoping for more of this kind of work of yours author. Meanwhile. If you are interested and looking for blinds fabricator service Feel free to check and visit our site and look for our affordable items with a very nice quality. Thank you and Godbless!

    ReplyDelete

Checkout the online shop for new parts and service for you ride!

Click Here www.hughshandbuilt.com for more info on parts! Thanks - Hughs.